TEAMGROUP T-Force Vulcan DDR5 32GB (2x16GB) 6000MHz (PC5-48000) CL30 Intel XMP 3.0 & AMD Expo Compatible Desktop Memory Ram Black FLBD532G6000HC30DC01

Besides my fans being an absolute eye sore, I did match my ram to this build. These stick are on the MSI support list for the Project Zero board I am using in my Jonsbo D32PRO. Originally it did look awesome with the all black/silver design. But that was ruined when my Arctic Liquid Freezer III 240mm AIO wasn't working properly. Seriously bad noise coming from it. I concluded that it couldn't be the the pump because I had adjusted power to pump to slow it down but the sound remained. Turned fans up and down and audio of the noise would occur. Replaced the fans with Arctic P12PRO fans and the sound remained. Installed my Noctua fans (same in my image) knowing they were in perfect health. And sure enough, the noise was still there. Checked the fin stack to see if any fins were bent or squished causing the noise, nope. Fins were perfect could see right through with no serious obstructions....So because I had to replace that, I ended up going with all Noctua fans, which I had in stock. The only extra purchase was the two NF-A12x15 slim fans I bought for the bottom. I could have wedged full size 25mm thick fans down there, but chose against it. I know how turbulent airflow can get when you have two fans side by side, so preferred the thin fans to have that gap. Also the fans are installed closest to the glass door side (camera side) so that it can help push airlow up toward the top to exit through rear/top/psu. It works.For those wondering, YES, this is the Jonsbo D32PRO case. Yes, that is a 7900xtx red devil and it fits.... its a 3.5 slot card. But that's because the MSI Project Zero B650M board has the x16 slot at the very top of the 4 slots. While many m-atx boards have the x16 slot in the 2nd position of the 4.... Yes, this case supports back connect, as you can tell since there are no cables to be seen except for the GPU. YES, that is an extra long full size PSU (corsair RM1000X SHIFT) and the reason it also fits is because instead of the cables coming out the bottom they come out the side, which in my build means the back side. so all cables are legit on the back of the system minus the liquid cooler which I routed down below the memory (you can see it around the one screw, not tight and routed after installing the screw).You can see the silver ram REALLY fits with this motherboard. A killer combo for sure. Running full rated speed, can't complain.

This is an excellent RAM module that delivers exactly what it promises. I'm using it with a Core i7-12700KF, and the performance has been flawless. It provides fast and stable speeds, with zero issues so far. After several months of use, I'm fully satisfied with its reliability and power. I definitely recommend this product and brand.

La calidad que se siente, como están empacadas, y 32gb a una buena frecuencia, esta super bien, el único detalle que no entiendo es el precio por el color. Aunque no me preocupa tanto la estética, si habría estado mejor si fueran color negro.

For those who are not sure if it comes with both profiles (XMP/EXPO) the answer is YES.I have purchased the 6400mhz version cl32-39-39-84 which comes with both profiles.The description on The Teamgroup Website even on the amazon itself is unclear but in the end, it turned out to be positive.I have purchased too 6000mts cl30-36-36-76 and does it have XMP/EXPO Profile too.

Pretty good ram, definitely is premium in my opinion and the build and overall feel of it is amazing! Was scared to install it at first which was funny but got to it! The size fits perfectly into my ATX motherboard and super reliable with it being 2x16gb.

I upgraded to the TEAMGROUP T-Force Vulcan DDR5 64GB (2x32GB) 6400MHz kit, and the difference was immediate. As a photographer who regularly works with high-resolution RAW files and multi-layered TIFFs, I was starting to notice some sluggishness with my older DDR4 setup — especially when batch-processing through tools like PureRAW and Topaz Photo AI, or making local adjustments in Adobe Camera Raw.With this RAM installed, everything just flows. File previews load almost instantly, and switching between large images or running intensive edits doesn’t slow the system down anymore. Export times have also improved noticeably, even with 48MP files. It’s not just snappy — it feels effortless now.Installation was straightforward, and the modules look great too — clean, low-profile design that fits well even in tighter builds.If you do any kind of heavy photo or video work, this is a worthwhile upgrade. It’s more than just a spec bump — it actually impacts your workflow in a real, tangible way. Highly recommend!

Super long boot times in this setup. 64 gb. Seems fine otherwise. system specs Ryzen 9 7950x , MSI pro X70-p wifi, with Samsung 990 evo plus 4tb, 4th gen m.2. win 11. RTX 4070 super. I am Having super long ( 7 minute) reboot times with red and yellow lights in the troubleshooting leds (cpu/ ram not detetced) that go out after 7 mins or so. flashed bios to the only other latest version. system is stable however with low temps, but hate to get into a pvp sesh and then have a crash or a reboot in the middle. Hoping for other people with same issue, resolution. Also of note real hard to get into bios.

It runs perfect on my build and i was able to overclock it right away with the motherboard (gigabyte aorus elite wifi 6 ICE). this is a low profile RAM so you can put a CPU cooler like the pearless assassin 120 digital and you won't have to put the fans in any awkward position to not hit the RAM. Just BUY IT.