The Metal House Standard black rubber car edge protective trim 14mm x 8.5mm FITS 1mm - 3mm

Proper no nonsense tough rubber that feels like it's going to stand up to the sun. It cuts well as is strengthened by an intermittent internal metal profile, which also seems to have good rust resistance. I like this stuff. Be advised that if you order two it'll come in one long length (best cut with a Stanley blade). It fits the door edge perfectly and looks good.

I was looking for grommet strip for an open end on steel trunking, the normal stuff is pretty rubbish as it needs gluing on to keep it in place. This did the job perfectly. I used a 25mm snap of blade knife to cut it, most of the time I got lucky first time as there is thin ribbed metal inside so you need to cut between the ribs.

Really sturdyEasy to cut and fitVery pleased with the product

This finishes a metal edge perfectly, it is easy to fit and it adapts to curves well. It is very secure once fitted, great value as well so really pleased with it.

excellent product - used for my motorcycle parts - extra protection as it has metal inserts to give extra strength and also makes moulding to shape easy

Alleluia! I have a1998 Ford Scorpio, otherwise pristine, but missing the rubber trim piece that should be fitted over the front of the headlining, leaving that front edge sagging a bit between the upper console and the outer edge of the top of the windscreen on both sides, and the fabric detaching and looking ragged along the edge. I did find, some time ago, a never used genuine Ford spare, but the problem was the headlining edge had delaminated somewhat and softened, and would not fit into the Ford trim, which needed the edge to be tight and rigid to be forced far enough into the rubber trim to be gripped. Many attempts failed, until I finally thought to look for some other make of black rubber trim that might work instead. After some reviewing of different trims for sale here I picked this one, and it worked exactly as I hoped. While the headlining edge wouldn't push straight in this trim through the inner 'gripper' bits, the metal 'ribs' in this trim meant that I could insert a flat-head screwdriver and open this trim up so the delaminated and feathered headlining edge would go right in to the bottom of the U, and then I could simply clamp the U 'arms' back together just with finger and thumb pressure, gripping the headlining. A black rubber trim enfolding and gripping the headlining again, and stiff enough but bendable enough to get the front of the headlining up, level and neat as it should be. Just wish I'd thought of this sooner and saved a lot of frustration with all the failed attempts to fit the original Ford part. Those steel ribs in the rubber made all the difference, allowing the U legs to be pushed apart and hold that shape, then pushed back together to grip. Brilliant.

I am very impressed with this trim: it's heavy duty, chunky, very strong (I had to cut it with pliers as a knife and heavy scissors wouldn't do it..) but fits easily and is capable of fitting around some tight corners without losing its grip. I used a small tack hammer to gently knock the trim into place, I think you would be hard pressed to do it by hand alone. Looks smart when fitted, though its worth bearing in mind I put it on a 4x4: if you want something sleek and slim you probably should look for a different product. Very reasonably priced, delivered swiftly, I would recommend this product and would buy it again.

Was to small for what I needed and very difficult to attach.