Under Cabinet Lighting, 2 Pack 13 Inch 3 Color Temperatures Motion Sensor Light indoor, USB Rechargeable Under Cabinet Lights, Stick-On Magnetic Closet Light, Wireless Under Counter Lights for Kitchen

13 inch size ehite lights perfect for under cabinet kitchen lighting in food prep area. Light is not harsh or blue even on brightest setting. Slim design makes them invisible. I have them set for motion detection on brightest setting. Motion detection is very sensitive and detects motion about 4 feet away even though mounted under cabinet. Batteries in both units lasted 16 days in a high traffic area of kitchen preparing 3 meals a day and cleanup activity (probably about 60 to 90 minutes a day). Love that they come on automatically for late night visits to the kitchen. Easy to set up and mount. Charging cord set up to charge 2 units at once is great. Motion detection becomes less reliable and brightness dims when battery is very near the end of its charge. Probably a good idea to calendar charging cycles so that you don't completly run down the battery which would be damaging to the batteries. If you want even lighting under cabinets I recommend putting the units no more than 1 foot apart.

I had a senior dog whose eyesight wasnt great so I had been trying to find a nightlight that was strong enough for him to see but not strong enough to interfere with our sleeping. I bought 2 or 3 different types of lights & I have to say this one was the best. The motion detector is great, maybe too good for some, it would light up at the first stirring & stay lit while he was moving then go back out as soon as he settled back down. The magnets are strong enough to hold to just about any metal object which was an issue I kept having with the other brands as they would slowly slide down to the floor. Unfortunately my senior dog has crossed the rainbow bridge but now I use the lights to light the way for my grandkids when they wake up at night to get a drink or go to the bathroom.

Update 20Feb2025: The light lasted almost 6 months before dying (completely dead) on the first complete charge for my application. Not bad. Everything is still well stuck, nothing has fallen off. I have since mounted one each of these in a couple of Ikea PAX wardrobe cabinets and they work great in that application to provide just enough to see what is going on in a dark or dim environment in our bedroom.Product purchased was the 13-inch, white, two pack. I would definitely buy these again if needed.I was surprised, when I measured this light, that it exceeds its specs. It is pretty rare, in my experience, with battery operated products to do so on Amazon.I fully charged one light. Then let it run at its brightest setting until it died. It lasted a total of 11 hours and 6 minutes. Then I charged it to full from that state. It took 5 hours and 6 minutes. Total capacity to charge was 3325mAh. I'd say that for the first 9 hours or so it was at the full bright setting and at about the 9 hour mark it dimmed to about the 50% setting (still very usable in my corner cabinet use case) for the last two hours before shutting down completely.When the light is activated by motion, it stays on for about 20 seconds. It stays on longer if motion keeps triggering it until the motion stops.The light measures 13 1/16 inches long and 1 3/4 inches wide and using the sticky magnetic plates for mounting, the total thickness is 1/2 inch (about 7/16 inches without the metal plate). The two metal plates that you stick to your surface are 2 5/16 by 1 inches.There is pretty small hole in the metal plate that you could theoretically use to mount with a screw but the metal is pretty thin and the hole is only 1/6 inch wide but could be very easily drilled out wider if needed. Since it is so thin, you would definitely need a flat head screw to try and get the screw head flush with the plate. You could always use a similar or smaller sized plate of your own making as well. The plate is not a magnet, just magnetic. The magnets are within the light spaced about 9.5 inches apart, so you can stick these on magnetic surfaces which opens up all kinds of other applications for these). A couple of flat head screw heads or washers were all it took to support the light's weight horizontally, but they would not do so vertically as the light's back surface is metal (aluminum it seems) and so it slides off the screw heads in that position.I've mounted one each of these vertically in two corner cabinets. So far everything is staying stuck pretty well. Will report back if/when they fall off/unstick.Photos show a USB meter while charging (red light) and when fully charged (green light). The motion sensor bubble lights red while charging and green when complete. Two other phots show the inside of the cabinet during daytime, one with light off and the other with light on. I adjusted the photos' brightness to match what I see with my eyes, to give a realistic representation of before and after brightness levels. Light is mounted vertically on the right wall as shown in last photo (not adjusted for perceived brightness).One 8 inch USB-A to USB-C cable is included that has two USB-C connectors so you could charge two lights at a time. No power adapter is supplied.There are four switch settings: On (always on), Off (always off), Moon Symbol (only motion activates in dark environments) and a Sun symbol (motion activation active even in iight environments). Another button controls brightness levels a quick press cycles to the next brightness level. Brightness levels are stated as 100%, 75% and 50%. There is a fourth level that seems to be a duplication of the 50% level. Not sure what that is supposed to be. I could not get the Night mode to work. Even when shining a bright LED flashlight at the motion sensor, it still motion activated, duplicating the behavior of the Daylight setting (which is what I use in my cabinets). All 4 of my lights behaved the same way, so I doubt this is just a defect. You can also set the light brightness by pressing and holding the brightness button and releasing at the desired brightness level from 10% to 100%. The light will remember your brightness setting.

I actually plan to order more of these because I like them so much! The reason I gave this four stars instead of five is because one of them didn't stick underneath the cabinet. They attach by magnets with a sticky back. I awoke one morning a few days after installation with one of the lights on the countertop. I put it back up with Command Strips and it's stuck since then. I love that the lights are rechargeable, though I've had them 2 weeks and I haven't had to recharge them yet, which is a pleasant surprise. I also love that they are magnetic for easy removal and reinstallation. The very best part is that they are motion activated. When I want to get a drink late at night, I walk into the kitchen and both lights come on. They are dim enough that I'm not blinded (like I would be from overhead lights) but there is enough light to walk around the kitchen to get what I want. I plan to order more.

These are inexpensive but practical lights. I purchased the pack of two that I intended to install in my pantry since it had no lighting of its own. After placing one under the top shelf, I found that the lighting was sufficient to illuminate everything in the pantry. This worked out perfectly because I had a small area under my kitchen cabinets that required more lighting.I appreciate that it features a user-controlled intensity setting, as well as various other modes. I found the nighttime/ motion detector to be the most suitable for my needs.Installation is as simple as it gets. I will give these lights a BUY rating, particularly at this price point.