Zigtiger Dimmer Light Switch Led Dimmer Switch 3-100W Led Dimmer Switch 1 Gang Dimmable LED Incandescent Halogen Bulbs/White

The Zigtiger LED Dimmer Switch in Antique Brass has exceeded my expectations in every way. Its seamless combination of vintage aesthetics and modern functionality instantly caught my eye. Installing it was a breeze, especially since no neutral wire was required, making the process hassle-free. This 1 Gang 2-Way dimmer switch is a versatile gem, compatible with a range of dimmable LED lights, incandescent bulbs, and halogen fixtures, accommodating wattages from 3 to 100 watts.The dimming performance of this switch is nothing short of impressive. The trailing edge technology ensures smooth and flicker-free adjustments, allowing me to set the perfect ambiance for any occasion. Whether I'm unwinding with a soft, warm glow in the evening or brightening up the space for a lively gathering, this dimmer switch offers unparalleled control. What truly sets this apart is the attention to detail in its design. The antique brass finish adds a touch of sophistication to my home decor, turning the switch itself into an aesthetic statement. If you're searching for a dimmer switch that marries style and practicality flawlessly, the Zigtiger LED Dimmer Switch is an absolute winner. It's now an essential part of my living space, providing the ideal lighting atmosphere with an exquisite visual appeal.

Like most of these dimmers can be a bit of a faff to set min brightness, but has proved reliable in use.

Bought as a replacement unit for an older dimmer switch damaged when bulb blew. It came well packed with screws and instructions. A very simple installation. Fitted in minutes. Works a treat. Brilliant.

So, I literally just fitted this switch in my daughter's bedroom and the dimmer worked great. No buzzing or flickering, worked perfectly!I then tried the push function to switch the light off, and it didn't work. The switch seemed to be bottoming out on the surround before actually switching.I proceed to press the switch a little harder until it actually switches and turns the light off. Then I have the same issue turning it back on!I decided to remove the face plate and slacken the retaining screws slightly. The push function now just about works, but the light no longer dims!!!Literally broken within 5 minutes of taking it out of the box!On inspection, this switch seems to be very flimsy and either badly designed or quality control missed this one. If pressing the switch a bit harder to make it work as it should is enough to break it, it doesn't seem fit for purpose, to me. Incredibly disappointed.

Works good ,time will show

I used this item to replace a malfunctioning dimmer switch on a bedside light. No problem with fitting it. When it came to actually use it, I found that it was a bit 'iffy' with the on/ off function press function.I then took of the knob, and had a look and it, and it appeared to me that the internal 'clamp' was a bit long tbh. I inserted a very small piece of packing into the centre of it, which then allowed the 'doctored' knob to work the on/off function without any problems.In the photo, the knob from the old switch is at the top, and you may be able to see there is an internal 'bar' inside which reduced the internal barrel length. In the new knob there is no 'bar' to do similar. So, if you are having problems with on/ off function, try a thin bit of packing and see if that solves your issue.

Very good switch. It was easy to fit and works well. I liked the way there is some adjustment when you set it up first time

It was easy to install and it looks and feels good. It gives a decent range of brightness of my LED bulbs. The only issue is that, sometimes, the brightness of bulbs may start changing over time without any input; it would get slightly brighter for a few seconds, then reduce back, then get slightly brighter again, etc. I noticed this on low settings. Slightly turning the dimmer usually fixes the problem.